CommScope ERA CAP L2 18/21/ 23T/26 F-DC Installation Manual page 14

With fiber interface
Hide thumbs Also See for ERA CAP L2 18/21/ 23T/26 F-DC:
Table of Contents

Advertisement

Fiber CAP L2 Overview
Table 5. Function of the CAP L2 Connectors and LED (2 antennas) (Continued)
Ref # Label
Description
3
None
Proprietary 4-pin DC
power connector
4
ANT 2
4.3-10 RF connector
5
None
Power and Status LED
6
Port 2
Port 2 OCTIS Connector
8
Ref #
Label
Description
0
None
Grounding Bolt
Port 1
Port 2 OCTIS Connector
1
ANT 1
4.3-10 RF connector
2
ANT 2
4.3-10 RF connector
3
CommScope ERA
®
CAP L2 with Fiber Interface
Page 10
Function
Connects to a local or remote DC power supply. The CAP L2 does not ship with any
power cables preinstalled; you need to order the power cable assembly that is
appropriate for this installation.
• 7774061: Cable Assembly, CAP L Local Power Jumper, 0.5 m
• 7816237-xx: Cable Assembly, CAP L Local Power Jumper, 3.0 m
Connect to external antennas or to one of the ports on a multiple input cross-polarized
antenna via 50Ω coaxial cable. The antenna ports ship with dust caps that can be
discarded upon unit installation.
See
"Connectors and LED for the Fiber CAP L2" on page 9
Port to pass fiber cable to the SFP+ module. The port seal is the OCTIS Universal
connector PN 7847069. Connecting the fiber cable to the CAP L2 requires removing the
service lid.
6
5
7
Figure 2. CAP L2 Connectors and LED (4 antennas)
Table 6. Function of the CAP L2 Connectors and LED (4 antennas)
Function
Connects the CAP MX to an approved earth-ground source.
Port to pass fiber cable to the SFP+ module. The port seal is the OCTIS Universal
connector PN 7847069. Connecting the fiber cable to the CAP L2 requires
removing the service lid.
Connect to external antennas or to one of the ports on a multiple input
cross-polarized antenna via 50Ω coaxial cable. The antenna ports ship with
dust caps that can be discarded upon unit installation.
Connect to external antennas or to one of the ports on a multiple input
cross-polarized antenna via 50Ω coaxial cable. The antenna ports ship with
dust caps that can be discarded upon unit installation.
4
3
2
1
0
M0203A9B_uc
© September 2022 CommScope, Inc.

Advertisement

Table of Contents
loading

Table of Contents