Safety; Required Equipment; Electrical Safety; Radiation Danger - TA Instruments DHR Series Getting Started Manual

Safety

Do not attempt to service this accessory, as it contains no user-serviceable components.

Required Equipment

While operating this accessory, you must wear eye protection that either meets or exceeds ANSI Z87.1
standards. Additionally, wear protective clothing that has been approved for protection against the
materials under test and the test temperatures.

Electrical Safety

You must unplug the instrument before doing any maintenance or repair work; voltages as high as
120/240 volts AC are present in this system.
WARNING: High voltages are present in this instrument. Maintenance and
repair of internal parts must be performed only by TA Instruments or other
qualified service personnel.
AVERTISSEMENT: Présence de tensions élevées dans cet instrument. La
maintenance et la réparation des pièces internes doivent être effectuées
uniquement par TA Instruments ou tout autre personnel d'entretien qualifié.

Radiation Danger

WARNING: The SALS Accessory uses a Class 2 laser product. Do not stare
into beam.
AVERTISSEMENT: L'accessoire SALS utilise un produit laser de classe 2. Ne
regardez pas fixement le faisceau.

Instrument Symbols

The following label is displayed on the accessory for your protection:
Symbol
DHR/AR Series SALS Accessory Getting Started Guide
Explanation
This symbol on the front of the SALS Accessory warns that laser light is present
during operation of this instrument.
The SALS Accessory uses a Class 2 laser product. Do not stare into the beam.
Ce symbole affiché à l'avant de l'accessoire SALS avertit de la présence d'un
rayonnement laser pendant l'utilisation de cet instrument.
L'accessoire SALS utilise un produit laser de classe 2. Ne regardez pas fixement
le faisceau.
Page 6