Video Menu - Panasonic AJ-HD150 Operating Instructions Manual

Setup menus
USER menu
<VIDEO>
No.
600
601
602
603
604
605
620
621
<Note>
622
Setup menu items
No.620 to No.623 do
not work if the AJ-
UDC150P optional 623
board has not been
installed.
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
VIDEO IN 0000
SEL 0001
0002
VIDEO INT 0000
SG 0001
0002
0003
SDI IN 0000
MODE 0001
V-MUTE 0000
SEL 0001
0002
0003
FREEZE 0000
SEL 0001
INTERPOLATE 0000
0001
DOWNCON 0000
MODE 0001
0002
0003
0004
UPCON 0000
MODE 0001
0002
0003
0004
DC RESP 0000
HV 0001
0002 NARROW
UC RESP 0000
HV 0001
0002 NARROW
– 67 –
INT SG
This selects the video signals to be input.
SDI
0: The internal signals selected by the VIDEO INT SG menu
SDTI
item are generated.
1: The serial video signals supplied to the HD SDI IN
connector are selected.
2: The compressed IF signals supplied to the SDTI IN
connector are selected.
OCB
This selects the type of internal signals.
MB
0: The color bar signal is selected.
RAMP
1: The multi burst signal is selected.
BLACK
2: The ramp signal is selected.
3: The black signal is selected.
DR OFF
This selects the HD SDI input processing method.
DR ON
0: After the lower 2 bits have been rounded off (rounded up
for 5 or above, rounded down for 4 or below), the higher 8
bits are recorded.
1: The 8-bit signals which have been dynamically rounded are
recorded.
N-MUTE
This selects whether to mute the video output signals when
GRAY
LOW RF has been detected during playback.
BLACK
0: The signals are not muted. (They are frozen.)
NOISE
1: They are muted with gray.
2: They are muted with black.
3: They are muted with noise.
FIELD
This selects the freeze status for still pictures.
FRAME
0: Field freeze
1: Frame freeze
OFF
Vertical interpolation is automatically conducted during slow
AUTO
playback to reduce the vertical movement of the playback
pictures, but this setting enables the interpolation to be forcibly
turned off.
0: Interpolation is forcibly turned off.
1: Interpolation is automatically turned on during slow
playback.
FIT_V
This selects the screen during down-conversion.
FIT_H
0: Side cut mode
FIT_HV
1: Letterbox mode
14:9
2: Squeeze mode
13:9
3: Semi-letterbox 14:9
4: Semi-letterbox 13:9
FIT_V
This selects the screen during up-conversion.
FIT_H
0: Side panel mode
FIT_HV
1: Top and bottom in vertical direction cut off
14:9
2: Stretch mode
13:9
3: Semi-letterbox 14:9
4: Semi-letterbox 13:9
WIDE
This selects the horizontal and vertical frequency band during
STAND
down-conversion.
WIDE
This selects the horizontal and vertical frequency band during
STAND
up-conversion.
Description