Table of Contents
Advertisement
Troubleshooting
Symptoms related to software, operating system or operations
Symptom
$ A warning dialogue appears when
the
display
changes
Windows NT startup screen during
startup.
$ The application program's icon fails
to appear on the Windows NT
startup screen.
$ A warning dialogue appears when
the application program is started.
O Were the mouse and other peripheral devices connected after the
to
the
power was turned on?
If this is the case, the power must be turned off, the devices must be
connected properly and then the system must be re-booted.
O Was the power turned off and then immediately turned back on?
Wait at least 5 seconds after turning the power off before turning it
back on.
O Has the system been started up in the VGA mode (640a480 screen
resolution) or has the screen resolution setting been changed?
O Has the display size on the personal computer's monitor been
adjusted so that the whole picture fits inside the display range?
The application program's icon may be located outside the screen
display range.
O Have you deleted the application program's shortcut icon?
If the icon has been deleted in error, check inside the [trash folder],
and bring back the "Init Emv.exe" shortcut icon from it.
O Is the AV hard disk recognized correctly by Windows NT?
Start the disk administrator on the Windows NT management menu,
and check the AV hard disk recognition status.
– 25 –
Suggested remedial action
Advertisement
Table of Contents
