Install The Router Using A Lift - IBM J02M Quick Start Manual

IBM Ethernet Router J02M Quick Start

Install the Router Using a Lift

To install the router using a lift:
1.
2.
Figure 6: Load the IBM Ethernet Router J02M onto the Lift
3.
4.
5.
12
Step 3: Install the Router
Ensure that the rack is in its permanent location and is secured to the building.
Ensure that the installation site allows adequate clearance for both airflow and
maintenance. For details, see the IBM Ethernet Router J02M Hardware Guide.
Load the router onto the lift, making sure it rests securely on the lift platform
(see Figure 6 on page 12).
Using the lift, position the router in front of the rack or cabinet, centering it in
front of the mounting shelf.
Lift the chassis approximately 0.75 in. above the surface of the mounting shelf
and position it as close as possible to the shelf.
Carefully slide the router onto the mounting shelf so that the bottom of the chassis
and the mounting shelf overlap by approximately 2 inches.