Table of Contents
Advertisement
User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST 3000
2.2 Installation of SONOST 3000
NOTE !
Since SONOST 3000 is made up of sensitive components, you should install the
product according to instructions below.
NOTE!
Do not install and keep SONOST 3000 at
excessively high or low temperatures.
Proper temperature:
18~27 ℃
Do not install the system in a place exposed to
polluted air and high humidity, and do not
expose the machine to direct ray sunlight. It is
advised to use SONOST 3000 in a place
equipped
with
air
conditioning
or
heating.
Proper
humidity:
20~80%
Do not share the power outlet with other
products through an extension cord.
Do not cover ventilation of the system or place
it near or against a wall. If the temperatures of
the inside of the system rise too high, it can be
a cause of the fire.
DOC. No. : OT06-2R7124
Do not install or keep SONOST 3000 in a
place where the machine can be rocked or
shaken.
Make
sure to place the
system parallel
to the floor.
Install SONOST 3000 at a place where it is
free from water or chemicals.
For escaping from electronic noise, do not
install near an electronic generator, X-ray
equipment,
or
broadcasting
equipment.
It
affects
the
device to produce
inaccurate results.
100-240V is usable. When SONOST 3000 is
taken out of a warehouse, insulating
transformers should be set to 100-240V. Since
sudden power outage can remove all data
saved in the product,
you should install
SONOST 3000 at a
place
where
power
supply is stable.
23
Advertisement
Table of Contents
