Setup (Default Settings) - Panasonic AJ-D455 Operating Instructions Manual

Setup (default settings)

The unit's major settings are performed by making selections on menus.
The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3
connector in the unit's connector area are hooked up. The menus can be output to the SDI
OUT 3 connector as well when the AJ-YA455P component serial interface board is used.
Changing the settings
1
2
3
4
5
<Notes>
• When the RESET button is
pressed to return to the
factory settings, the factory
settings are restored only for
the user file currently being
used and other user files are
not affected.
• The changed SYSTEM menu
contents are stored in the
memory even if the MENU
button is pressed.
Press the MENU button.
The setup menu appears on the TV monitor and setup menu No. appears on the
counter display. (If the setup has already been performed, the screen showing the
changes made last will appear.)
Press the cursor buttons (
The cursor ( ) on the menu screen moves and the item No. on the display flashes.
• When the button is pressed, the item No. is incremented for 001
004 and so on; when the
Press the cursor buttons (
The menu screen and display setting No. now flashes.
When the button is pressed, the setting No. is incremented; when the
pressed, it is decremented.
Repeat steps 2 and 3 to change other items.
Press the SET button.
The changes are now stored in the memory.
• To return the items to the settings established before the changes were made, press
the MENU button without pressing the SET button.
To return the setup settings to the factory (initial) settings, press the RESET button
while the menu is displayed.
The following message is displayed.
SETUP-MENU INIT SET
YES<PLAY>/NO<STOP>
When the PLAY button is pressed, the factory settings are restored.
ON
POWER
OFF
LEVEL
HEADPHONES
, ) and select the item to be set.
button is pressed, the item No. is decremented.
, ) at the position where the change is to be made.
1 5
CH CONDITION
CTL/TC/UB/
REMAIN
RESET
SUPER TC
MENU SET
ON INT
CH 1
OFF EXT
TC
PRESET DIAG
AUDIO
FILE
REC LEVEL AUDIO
PAGE
MONITOR
CH 1
DVCPRO/DV Y PB PR SDI
CH 2
REMOTE
MIX SDI CMPST AES/EBU
CH 2 ANALOG S-VIDEO LOCAL
ANALOG
VIDEO IN AUDIO IN
2, 3
15
002 003
button is
EJECT
REW STOP FF PLAY REC
DVCPRO
DV