Audio Menu - Panasonic AJ-D455 Operating Instructions Manual

Setup menus
USER menu
<AUDIO>
No.
720
721
722
723
729
731
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
EMBEDDED 0000
AUD 0001
LINE CH 0000
SEL 0001
INT SG 0000
0001
DV PB ATT 0000
0001
REC PT 0000
MUTE 0001
REF LEVEL 0000
0001
0002
OFF This selects whether to superimpose the audio data onto the
serial output.
ON
0: Data is not superimposed.
1: Data is superimposed.
<Note>
This display will not appear unless the AJ-YA455P serial inter-
face board (optional accessory) has been installed.
PCM This selects the audio output for CH1 and CH2.
0: PCM AUDIO is output.
AUTO
1: PCM AUDIO is output in the –0.43 to 1 speed range; in
all other cases, CUE is automatically output.
<Note>
The PCM AUDIO output CH1 and CH2 signals are output
separately regardless of the position selected for the AUDIO
MONITOR SELECT switch.
OFF This selects whether the internal signal is to be used for the
audio input signal.
ON
0: The internal signal is not selected.
1: The internal signal is selected.
<Notes>
• The internal signal has a frequency of 997 Hz.
• This setting is invalid if the VIDEO INPUT switch #3 has
been set to DVCPRO/DV.
OFF This selects the audio output level for DV format playback.
0: The audio output level is not attenuated.
ON
1: The audio output level is attenuated (reduced).
For selecting whether to mute the sound at the joins between
OFF
recordings during DV or DVCAM cassette playback.
ON
0: The sound is not muted.
1: The sound is muted.
FS-20 For setting the audio reference level.
0: Full scale, –20 dB
FS-18
1: Full scale, –18 dB
FS-12
2: Full scale, –12 dB
36
Description