Panasonic AJ-D455 Operating Instructions Manual page 17

Lock mode can be set to protect the settings in the system files and user files (USER2 –
USER5). Settings can no longer be changed when this mode is set.
To set and release the lock mode for the system files and user files use setup item No. 30
(MENU LOCK) and setup menu item No. A03 (MENU LOCK), respectively.
Setting and releasing the lock mode.
1
Press the MENU button.
2
While holding down the FILE button, press the
which the lock mode is to be set or released.
3
Press the or
No. 30 (MENU LOCK) or setup menu item No. A03 (MENU LOCK) for the system or
user file.
4
Press the or
To set the lock:
To release the lock: Select the 0000 (OFF) setting.
When the lock has been set, "LOCKED" flashes on the menu screen. In addition, the
counter display stops flashing and lights.
SETUP-MENU
<USER2>
000 P–ROLL TIME
001 CHARA H–POS
002 CHARA V–POS
003 DISPLAY SEL
004 LOCAL ENA
005 TAPE TIMER
006 SUPER
007 CHARA TYPE
101 SHTL MAX
5
Press the SET button. The setting is now stored in the memory.
<Notes>
• The lock mode cannot be set for the USER1 file settings.
• Even if the RESET button is pressed, the files which has been set to the lock mode cannot
be reset to the factory settings.
button and move the cursor ( ) on the menu screen to setup item
button, and select lock mode setting or release.
Select the 0001 (ON) setting.
LOCKED
NO.000 – 0005
5s
23
T&STA
ST&EJ
12h
ON
WHITE
X32
17
or button, and select the file for
5