Advertisement
1)
DESCRIPTION
SMART P gas detectors come in the following versions based on the type of gas to be
detected:
CO, range 0-300 ppm, 3 pin industrial cell
NO2, range 0-30 ppm, 3 pin industrial cell
Detectors with dual sensor were manufactured to optimise installation costs, coupled with the
CO-NO2 and CO-PETROL VAPOUR sensor in a single case.
SMART P use high performance sensor cells and test all functions including a self test for
CO cell reliability.
SMART P detectors are set for 4-wire connections: 2 for power and 2 for data communications
via RS485 serial to the MULTISCAN++PK unit.
SMART P provide fast and safe installation as well as easy maintenance and field calibration
via the STS/CKD-PK calibration keypad.
Detectors run on 12-24 Vdc power and sold in IP55 metallic cases.
SMART P-1
SMART P-1 detectors for Carbon Monoxide and NO2
CODE
S2398CO
CO detector for car parks RS485 serial outputs. Range 0-300
ppm.
S2399ND
NO2 detector for car parks, RS485 serial outputs. Range 0-30
ppm.
SMART P-2
MT3481E.doc rev.2
Designed to fulfil the new European Standard
for gas detection in car parks, the SMART P-1
gas detectors provide a serial RS485.
The SMART P-1 employ electrochemical cells
for the detection of CO or NO2.
To meet with the standard in full, these
detectors
MULTISCAN++PARK gas control panels.
DESCRIPTION
Designed to fulfil the new European Standard
for gas detection in car parks, the SMART P-2
gas detectors offer the simultaneous detection
of CO and NO2 or Petrol vapours integrated in
the same detector.
The SMART P-2 provide a serial RS485.
To meet with the standard in full, these
detectors
MULTISCAN++PARK gas control panels.
20/06/2018
are
to
be
connected
CAT.
B
B
are
to
be
connected
Pagina 4 di 14
to
€
240,00
320,00
to
Advertisement
