Advertisement
Quick Links
Locker 3-Shlef Bookcase
PRE-ASSEMBLY:
•
Please read all instructions before beginning assembly.
•
Two-person assembly is recommended.
•
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware.
Please Note: For ease in assembling the bookcase, we would recommend inserting screws and tightening only partially
during the assembly. Once all screws have been inserted, then tighten all connections fully.
PARTS & HARDWARE INCLUDED:
A - (46) Screws – 1/4" x 3/8"
C – (2) Casters – without brakes
E – (1) Open-end Wrench – 12mm
G / H – (1) Side Panels
(Left / Right)
J – (1) Lower Shelf
L – (3) Back Boards
B – (6) Screws – 5 x 10mm
D – (2) Casters – with brakes
F – (1) Frame Top
I – (1) Upper Shelf
K – (1) Frame Bottom
M – (3) Vertical Boards
1/3
www.pbteen.com
Advertisement
Related Manuals for PB TEEN Locker Bookcase 3
Summary of Contents for PB TEEN Locker Bookcase 3
- Page 1 Locker 3-Shlef Bookcase PRE-ASSEMBLY: • Please read all instructions before beginning assembly. • Two-person assembly is recommended. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. Please Note: For ease in assembling the bookcase, we would recommend inserting screws and tightening only partially during the assembly.
- Page 2 TOOLS REQUIRED (but not included): • Phillips or Flat-head Screwdriver ASSEMBLY INSTRUCTIONS: 1. Place Shelves (I & J) and Bottom Board (K) into Side Panels (G & H). Ensure pieces are positioned so the edge with the pre-drilled holes is the back edge. 2.
- Page 3 7. Insert the Screw (A) into the pre-drilled holes under the shelf glides at position marked in diagram. 8. Attach Casters without brakes(C) to the back, Casters with brakes (D) to the front of bookcase bottom using Open- end Wrench (E). Diagram 7.
Need help?
Do you have a question about the Locker Bookcase 3 and is the answer not in the manual?
Questions and answers