Dimension Dimension; Software; And Setting Setting; Set The 7.2 Create Create - 3onedata NP316 Series User Manual

5.2.2 RS-232/485/422(RJ45)
5.2.2 5.2.2 RS-232/485/422(RJ45) RS-232/485/422(RJ45)
6. 6. 6. Dimension Dimension
Dimension

7. 7. 7. Software

Software installation
Software installation installation and
7 7 7 . . . 1 1 1 Set Set the IP IP IP address the address address of of of the
Set the
The IP address of the device and the PC must in the same subnet (the default IP of the device is in the subnet
of 192.168.1.233). First, must make the IP address of the device in the same subnet network(192.168.1.X）
of PC.
If they are not in the same subnet network or the IP address have been used by another device,
Use Telnet change the IP address of the device.
1 8
No. RS-232 RS-485
No. No. RS-232 RS-232 RS-485 RS-485 RS-422
1 1 1
TXD Data+
2 2 2 RXD
3 3 3 RTS Data-
4 4 4
CTS
5 5 5 DSR
6 6 6 GND GND
7 7 7
DTR
8 8 8 DCD
and setting
and setting setting
the device
the device device
Page 7 of 12
NP308 series User Manual
RS-422
RS-422
RXD+
TXD+
RXD-
TXD-
short-circuit 5,6
(5 FULL,6 GND)