Application - 3onedata NP316 Series User Manual

1. Input the IP address of the device
2. Input the NO. of the port of the device(input 1~16)
3. Input 300
4. Default the parameter
IV. Knock "OK OK OK", Knock "Save
V. The
virtual serial port
device.
8. 8. 8.
NP316 series can be used to connect different devices for remote management, each serial port
operates independently to provide maximum versatility, each port can be operate in Driver,
TCP Server, and TCP Client mode independently.
Pay attention to to to the attention the questions as as as below questions
Pay attention Pay the questions
(1) Make sure the power supply input is AC/DC 220V；
(2) Use the cross-over cable if the devices connect to the PC.
(3) Use the straight-through cable if the devices connect to the HUB.
Note: Cable (blue)
Note: Note: Cable Cable (blue) (blue) with
Save". Then you can use the created the COM5. Save
COM5 can communicate with the terminal on the NO.1 port of the
below
below：
with the product is is is a a a straight-through product
with the the product
Page 11 of 12
straight-through cable.
straight-through cable. cable.
NP308 series User Manual

Application

Application Application