Identifying Jam Locations; Clearing Jams; Avoiding Jams - Source Technologies ST9822 Quick Reference Manual

5
Using a damp, soft, lint-free cloth, wipe the following areas:
•
ADF glass pad in the ADF cover
•
ADF glass in the ADF cover
6 Close the ADF cover.

Clearing jams

Avoiding jams

Load paper properly
•
Make sure that the paper lies flat in the tray.
Correct loading of paper
•
Do not load or remove a tray while the printer is printing.
•
Do not load too much paper. Make sure that the stack height
is below the maximum paper fill indicator.
•
Do not slide paper into the tray. Load paper as shown in the
illustration.
•
Make sure that the paper guides are positioned correctly and
are not pressing tightly against the paper or envelopes.
•
Push the tray firmly into the printer after loading paper.
11401A Granite Street | Charlotte, NC | 800.922.8501 |
Incorrect loading of paper
Sourcetech.com
5
Use recommended paper
•
Use only recommended paper or specialty media.
•
Do not load paper that is wrinkled, creased, damp, bent, or
curled.
•
Flex, fan, and align the paper edges before loading.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same tray.
•
Make sure that the paper size and type are set correctly on the
computer or printer control panel.
•
Store paper according to manufacturer recommendations.

Identifying jam locations

Notes:
•
When Jam Assist is set to On, the printer automatically
flushes blank pages or partially printed pages with after a
jammed page is cleared. Check your printed output for
blank pages.
•
When Jam Recovery is set to On or Auto, the printer reprints
jammed pages.