Loading The Multipurpose Feeder - Source Technologies ST9822 Quick Reference Manual

2
Adjust the paper guides to match the size of the paper that you
are loading.
3 Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the side guides fit snugly against the
paper.
Notes:
•
Load letterhead facedown with the top edge of the
sheet toward the front of the tray for one ‑ sided printing.
•
Load letterhead faceup with the bottom edge of the
sheet toward the front of the tray for two ‑ sided printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
5
Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.
11401A Granite Street | Charlotte, NC | 800.922.8501 | Sourcetech.com
2

Loading the multipurpose feeder

1
Open the multipurpose feeder.
2
Adjust the guide to match the size of the paper that you are
loading.