Hardware Installation And Assembly - ABB MicroGuard solution User Manual

M I C R O G U A R D ™ S O L U T I O N | M I C R O G U A R D | U M/ M I C R O G U A R D - E N R E V. B
. . .3 System Hardware

Hardware Installation and Assembly

1 Insert the analyzer into the backpack, securing it in place
with the backpack straps that loop underneath the analyzer's
handle . There is a second backpack strap that should be
clipped around the analyzer for added security .
Figure 10 Secure Analyzer in Backpack
Figure 11 Second Backpack Strap
NOTE
Do not put on the backpack yet .
2 Insert the NX6 into the wand by angling it to fit the curved
piece at the end of the frame into the end of the tablet .
Figure 12 Insert NX6 into Wand
3 Press the other end of the tablet in place with the metal
brackets: It should now be secured in place .
Figure 13 Secure Tablet in Place
4 Insert the inlet tubing into the analyzer inlet port .
9