Philips Sonicare ExtertClean 7000 Manual page 25

Storage
Replacement
Locating the model number
Warranty and support
To remove the screen, grasp the edges next to the
snaps, gently squeeze and pull out the protective
screen.
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of the
metal clasp.
6 Clean the protective screen and the UV light bulb with
a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the light
bulb with the metal clasp and push the bulb into the
clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen
with the slots on the reflective surface near the UV
light bulb. Push the screen straight into the slots on
the sanitizer.
9 Place the drip tray back in the UV sanitizer.
10 After cleaning, make sure the sanitizer is completely
dry before you connect it to the mains.
If you are not going to use the product for an extended
period of time, unplug it from the electrical outlet, clean
it and store it in a cool and dry place away from direct
sunlight.
Replace Philips Sonicare brush heads every 3 months to
achieve optimal results. Use only Philips Sonicare
replacement brush heads.
Look on the bottom of the Philips Sonicare toothbrush
handle for the model number (HX9600)
If you need information or support, please visit
www.philips.com/support or read the international
warranty leaflet.
25
English