Safety - Kaco blueplanet hy-switch Operating Instructions Manual

3.

Safety

The electrician is responsible for observing all existing standards
and regulations. The following applies:
– Keep unauthorised persons away from the component and/or system.
– Ensure operational safety by providing proper grounding, conductor
dimensioning and appropriate protection against short circuiting.
– Observe all safety instructions on the product and in these operating instructions.
– Switch off all voltage sources and secure them against being inadvertently
switched back on before performing visual inspections and maintenance.
– When taking measurements on the live component:
- Do not touch the electrical connections
- Remove all jewellery from wrists and fingers
Ensure that the testing equipment is in safe operating condition.
-
– Modifications to the surroundings of the component must
comply with the applicable national standards.
hy-switch for KACO blueplanet hybrid inverters
NOTE
Before using the product for the first time, please read
through the safety instructions carefully.
DANGER
Lethal voltages are still present in the connections and cables
of the housing even after the component has been switched
off and disconnected!
Severe injuries or death may occur if the cables and/or
terminals/busbars in the component are touched.
Comply with all safety regulations and current
>
technical connection specifications of the responsible
power supply company.
The component is only permitted to be opened or
>
serviced by a qualified electrician.
> Switch off the grid voltage by turning off the
external circuit breakers.
Check that no voltage is present using suitable
>
voltage tester.
Keep the component closed when in operation.
>
Page 9