Table of Contents
Advertisement
8.
Installation and start-up
8.1.
General information
Install the blueplanet hy-switch near the building connection or
energy sub-distributor.
18
Page
DANGER
Serious injury or death may occur from touching the cables,
busbars or terminals of the component or the control cabinet.
>
Comply with all safety regulations and current
technical connection specifications of the responsible
power supply company.
>
The component is only permitted to be opened or
serviced by a qualified electrician.
>
Switch off the grid voltage by turning off the
external circuit breakers.
>
Do not touch the cables and/or terminals/busbars when
switching the device on and off.
Keep the component closed when in operation.
>
WARNING
To prevent the risk of fire,
Never cover the component completely or partially when it is
in operation.
NOTE
Select conductor cross-section, safety type and safety value in
accordance with the following basic conditions:
Country-specific installation standards; power rating of the
component; cable length; type of cable installation; local
temperatures.
hy-switch for KACO blueplanet hybrid inverters
Advertisement
Table of Contents
Troubleshooting
