Table of Contents
Advertisement
11.3. Disassembling the component
↻ Component must have been electrically uninstalled beforehand (see 11.2).
1.
Unscrew the component from the wall with the four screws [
A_2.5].
2.
Hold the cover plate on the housing and carefully engage the upper and
lower plastic hinges.
11.4. Packaging the component
↻ Component is dismantled (see 11.3).
1.
If possible, always pack the component in its original packaging. If this is
no longer available, an alternative is to use equivalent packaging.
1
You must be able to close the box completely and it must be able to
accommodate the weight and size of the product.
11.5. Storing the component
↻ Component is packed (see 11.4).
Store the component at a dry location, in accordance with the ambient
temperature range. Environmental data [see chapter 5.2]
hy-switch for KACO blueplanet hybrid inverters
Page 33
Advertisement
Table of Contents
Troubleshooting
