Descaling - Saeco Moltio HD8768 User Manual

DESCALING

The descaling process takes approx. 35 minutes.
Limescale builds up inside the machine during use. It needs to be removed
regularly as it may clog the water and coff ee circuit of your machine. The
machine tells you when descaling is needed. If the machine display shows
the CALC CLEAN icon, it means that you need to descale.
Caution:
Not doing this will ultimately make your machine stop working prop-
erly, and in this case repairing is NOT covered by your warranty.
Use the Descaling solution only. Its formula has been designed to ensure
better machine performance.
You can purchase separately the Descaling solution. Please refer to the
maintenance products page in this user manual for further details.
Warning:
Never drink the descaling solution or any products dispensed until the
cycle has been carried out to the end. Never use vinegar as a decalci-
fi er.
Note:
During the descaling cycle do not switch off the machine. If this has hap-
pened you have to restart the descaling cycle to fully complete it. It will
restart from the point the descaling cycle had previously been left.
To perform the descaling cycle, follow the steps below:
Before descaling:
1
Empty the drip tray.
2
Remove the Automatic Milk Frother from the steam/hot water wand.
3
Remove the "INTENZA+" water fi lter from the water tank if it was in-
stalled and replace it with the small white original one. Place the water
tank back into the machine.
ENGLISH
51 51