Setting Up Protection Unit; Protection Levels Setup; Date/Time Setup - LEGRAND DMX3 Installation Manual

DMX

21. Setting up protection unit

21.1. Protection levels setup

Protection levels setup is realized with navigator knob.
The setting of the MP2 and MP4 protection units can be managed through the MENU of the protection
unit or through the "power control station" software.
Protection
setting is
managed
with PSW
assigned to the
protection unit.

21.2. Date/time setup

To correctly store data concerning possible faults, it's strongly recommended set up date and time on
protection unit.
For more information about protection unit date and time setup, see related instruction sheet.
Date/time settings remain stored for approximately one week, in the absence of any type of feeding.
108
3