Standard Functions Of The Breaker; Reset Pin - LEGRAND DMX3 Installation Manual

Hide thumbs Also See for DMX3:
Table of Contents

Advertisement

Available languages

Available languages

DMX

22. Standard functions of the breaker

22.1. Reset PIN

For use with
MAN position.
automatic
Default setting.
change
In this position the closing after trip commanded
over systems
by protection unit (pin ejected) is not permetted . is
(with feedback
necessary one external volantary action by hands
function) set the
of opeator in order to the reset the trip position by
reset button in
pushing the pin.
MAN position.
When this function is selected, the operator must
insert the pin before closing again the breaker.
3
AUT position.
Mostly used in monitoring systems.
In this position the breaker can be always closed
after a trip commanded by protection unit (pin
remains inserted).
Breaker will be always ready to close when its
status is as below:
Note: In order to set the pin in AUT position:
1. Push the pin until the end with a finger.
2. Pushing, turn the pin 90° in AUT position.
109

Advertisement

Table of Contents
loading

Table of Contents