Mowing - ALDI FERREX XSZ46J User Manual

Self propelled petrol lawn mower
Table of Contents

Advertisement

GB
IE
Operation
Start/Stop Bar Activation (Fig 11a)
WARNING!
Never start the engine before adding the right amount of oil to
the engine. Failing to do so will result in irreparable damage.
Pull the Start/Stop bar towards you. (Fig 11a)
Pull cord handle
With right hand, slowly but firmly pull the starter handle (Fig 11b)
and rope from the pull cord guide until you feel resistance, then
pull briskly. When the engine starts, return the starter rope to its
rest position gently.
NOTE!
Clearing a flooded engine:
If the engine won't start after you have trying to start several
times, the engine may be flooded with excess fuel.
Use the following procedure to clear and start a flooded engine:
A. Release the stop/start bar.
B. Remove the spark plug, dry it, and then reinstall it.
46CM Petrol Lawnmower
21
46CM Petrol Lawnmower
NOTE!
Install the spark plug carefully by hand, to avoid cross
threading.
After the plug is seated, tighten 1/8 to 1/4 turn with the spark
plug socket spanner to compress the washer.
C. Press down the primer for 3 times.
D. Pull the stop/start bar toward the upper handle.
E. Operate the starter as described above.

3. Mowing

NOTE!
Always observe the strictest safety procedures when using the
lawnmower.
Carefully read the safety instructions of this manual before
using the lawnmower.
Start the engine and allow it to run. See "Step-2 Starting the
engine". To stop the engine, release the stop / start bar.
Keep a firm grip on the upper handle with the stop/start
bar and propulsion lever closed and walk along with it self-
propelling, never run with the mower, be very careful when
mowing uneven or rough ground. Mow across slopes, never
up and down. Be careful when changing the direction of the
mower on a slope. Do not use the mower on a steep slope of
more than 15°.
22
GB
IE
Operation

Advertisement

Table of Contents
loading

Table of Contents