Table of Contents
Advertisement
Panasonic Media Manager
Panasonic Media Manager is a software package that includes RealOne
for Panasonic, an AAC plug-in, an SD Interface plug-in, driver software
for the USB Reader/Writer, and the setup programs for all these compo-
nents.
· Panasonic in no way provides a guarantee for the RealOne Player
Application or associated plug-in module. Panasonic accepts no lia-
bility for any problems that may arise either during the installation or
through use of the RealOne Player Application and/or associated
plug-in module. Panasonic does not provide a guarantee that con-
tent managed by the RealOne Player Application and/or associated
plug-in module can be transferred to an SD Memory Card.
· Electronic Music Distribution services are provided by a third party
and not by Panasonic. Therefore Panasonic has no responsibility
and accepts no liability for any problems that may arise with an
Electronic Music Distribution service.
· You may be unable to record or use music data in some computer
environments. This company accepts no responsibility for any loss of
data or damage incurred by loss of data.
· Modifications to the product and these operating instructions may be
made without prior notice.
· Illustrations and screen examples in these operating instructions
may differ from the actual product.
System requirements
Windows
®
98
(1)
, 98SE, Windows
Minimum System:
Pentium 233MHz MMX or equivalent CPU
64MB RAM
Hard Disk Space: 100MB for Software
200MB for Music
CD-ROM drive
16 bit Sound card and speakers
65,000-color video display card
set to display at 800x600 (video)
Internet connection and web browser
(Microsoft Internet Explorer 5.01 or later)
XP (Home Edition/Professional)
Windows
®
Minimum System:
Pentium II 333MHz or equivalent CPU
128MB RAM
Hard Disk Space: 100MB for Software
200MB for Music
CD-ROM drive
16 bit Sound card and speakers
65,000-color video display card
set to display at 800x600 (video)
Internet connection and web browser
(Microsoft Internet Explorer 5.01 or later)
(1) : You will need Internet Explorer 5.01 or later.
RealOne Player for Panasonic cannot be used on Microsoft
3.1, Windows
®
95, Windows NT
not be guaranteed when used on Microsoft
98SE, Windows
Me, Windows
®
Windows
95/3.1. Correct operation cannot be guaranteed when used on
®
Microsoft
®
Windows
®
2000 or Windows
Operating System requirements apply to RealNetworks
Third party plugins or add-ons may have different system requirements.
®
Me, Windows
®
2000 (Professional)
Recommended System:
Pentium II 333MHz or equivalent CPU
64MB RAM
Hard Disk Space: 200MB for Software
1GB for Music
CD-ROM drive that supports digi-
tal audio extraction
Full Duplex Sound card and speakers
65,000-color video display card set to
display at 800x600 or higher (video)
Internet connection and web browser
(Microsoft Internet Explorer 5.01 or later)
Recommended System:
Pentium III 500MHz or equivalent CPU
128MB RAM
Hard Disk Space: 200MB for Software
1GB for Music
CD-ROM drive that supports digi-
tal audio extraction
Full Duplex Sound card and speakers
65,000-color video display card set to
display at 800x600 or higher (video)
Internet connection and web browser
(Microsoft Internet Explorer 5.01 or later)
®
®
and Macintosh
®
. Correct operation can-
®
Windows
®
98, Windows
2000 or Windows
XP upgraded from
®
®
®
XP upgraded from Windows NT
®
products only.
The drivers for the USB Reader/Writer and RealOne for Panasonic are
included on the supplied CD-ROM. Follow these steps to install them.
Checking drive ID
You may have to specify the drive ID during installation. Turn on the com-
puter and start Windows. Refer to the following to check the ID of the
drive.
Double click on the "My Computer"
icon at the top left of the screen.
If you have more than one CD-ROM
drive, select the one into which you have
inserted the CD-ROM.
Installation steps
Do not connect the USB Reader/Writer until installation is complete.
1 Turn on the computer and start Windows.
2 Insert the included CD-ROM into the CD-ROM drive.
• The installer program starts automatically .
• If the installer program does not start, run the program by specifying
the file name. (See "If the installation program does not start auto-
matically")
Follow the on-screen instructions to proceed.
3 When
the
appears, check "Yes" and
click on [Finish].
The computer restarts and
installation is complete.
If the installation program does not start automatically
1 Click on [Start] and, click on
"Run...".
Windows
®
®
®
.
2 Type in "#:\setup.exe" and click on
[OK].
• The installation program starts.
• #: Enter the CD-ROM ID here.
(See "Checking drive ID")
• Letters you enter here can be
either upper or lower case.
Installation
display
a
a
CD-ROM drive ID
(E in this case)
Advertisement
Table of Contents
