Attaching Optional Light Kit; Maintenance; Important Care Instructions - Emerson PREMIUM SELECT CF4801AB00 Owner's Manual

To install an Emerson accessory light kit, remove the
three screws securing the switch cup assembly to the
fan, remove the switch cup assembly, and disconnect
the connector. Remove the screw plug from the
bottom of the switch cup and install the light kit in
accordance with the Emerson light kit Owner's
Manual.

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
1. Ceiling Fan Light Kits (see store or catalog).
2. Ceiling Fan/Light Controls (see store or catalog).
3. Downrod Extension Kits (see store or catalog).
3. Fan Blades (see store or catalog).
WARNING
!
The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.

Attaching Optional Light Kit

Maintenance

Accessories
!
To avoid possible electrical shock, be sure electricity
is turned off at the main service box before wiring.
!
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
10
WARNING
WARNING
WARNING
U.L. Model No.: CF4801 and CF4501