Kaba c-lever compact Installation Instructions Manual page 18

Maintenance and troubleshooting
Taking off the housing
3. Remove the guide ring (4), metal
ring (3) and housing (2), whilst
pushing against the spindle.
Changing the batteries
4. Take out the batteries
Take care to observe the polarity of the
batteries!
5. First insert the top batteries,
followed by the bottom batteries.
Fit the housing and handle
6. Push the housing (2) over the
mechatronic unit (1).
7. Position the metal ring (3) and
the guide ring (4) on the lever
handle bearing of the
mechatronic unit (1).
8. Fit the lever handle (5) onto the
square spindle of the
mechatronic unit (1).
ATTENTION
As old batteries can leak, it is advisable to check the condition of the batteries at
regular intervals. Kaba cannot provide compensation for any consequential
damage caused by faulty batteries (batteries cannot be guaranteed).
18 k2evo703en-2014-01
Installation instructions
1
2 3 4
1
2 3 4 5
Kaba c-lever compact