Adjusting The Shutters; Using A Gobo; Using A Gel Or Fi Lter - Springtree HD202 RGBWW User Manual

Led ellipsoidal
Table of Contents

Advertisement

Adjusting the shutters

To adjust the width and shape of the beam, simply push or pull any of the four shutters
located around the body of the ellipsoidal.

Using a gobo

If you want to shape your light with a gobo,
insert it into the included gobo holder so that it is
visible through the circular hole. In order for your
gobo to be projected correctly, it should be inserted
upside down and fl ipped. After you've inserted
your gobo into the holder, screw the holder shut
so that the gobo is secure and does not move. Slide the holder into the slot located in front of the
top shutter. When removing the gobo, make sure to let it cool before handling.
Using a gel or fi lter
To alter the color of your light
beam insert a gel into the included
gel frame. Screw the frame closed
so that the gel is secure and does
not move. Slide the holder into
the slots located in front of the lens.
When removing the gel and
holder, make sure to let it
cool before handling.
6
To look like this
Gel frame
Insert like this
Gobo holder
Framing shutter
Framing shutter
(615) 599-1505
www.springtree.net
(top)
Framing shutter
(left)
(bottom)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD202 RGBWW and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents