Installation
Power Supply
Before plugging your unit in, be sure the source voltage in your area matches the voltage
required for your lighting setup. Every unit has a power supply capable of 120V. Because line
voltage may vary from venue to venue, you should be sure your unit voltage matches the wall
outlet voltage before attempting to operate your unit.
* Always connect this product to a protected circuit with an appropriate electrical ground to
avoid the risk of electrocution or fi re.
Mounting
When mounting your ellipsoidal, make sure there is adequate room for ventilation. Oper-
ating in an insuffi ciently ventilated room can lead to an overheating of the device and may cause
serious accidents. Keep a minimum distance of 6 inches around and above the device. Before
deciding on a location, mount in a way that it will be easy to access the unit for maintenance and
addressing.
(615) 599-1505
www.springtree.net
5
Need help?
Do you have a question about the HD202 RGBWW and is the answer not in the manual?