Emergency Function & Auto-Restart Function; Emergency Function; Auto-Restart Function - Beko BMVIF 120 User Manual

6 Emergency function & auto-restart function

6.1 Emergency function

If the remote controller fails to work or maintenance necessary, proceed as follows:
Open and lift the front panel up to an angle to reach the emergency button.
1. One press of the emergency button (one beep) will lead to the forced Cooling operation
2. Two press of the emergency button within 3 sec (two beeps) will lead to the forced Heating
operation.
3. To switch off the unit, you just need to press the button again (a single long beep).
4. After 30 minutes in forced operation, the air conditioner will automatically start working in 23 °C
cooling mode, auto fan speed.
5. The Auto function is described in page 28.
The emergency button in some models could be on the right part of the unit under the front panel.

6.2 Auto-restart function

The appliance is preset auto - restart function by manufacturer. In case of a sudden power failure, the
module memorizes the setting conditions before the power failure. when the power restores, the unit
restarts automatically with all the previous settings preserved by the memory function.
A
The shape and position of the emergency button may be different
according to the model, but their function is the same.
C
Note: The external static pressure of heat pumps is 0 Pa for all models.
16 / 58 EN
front panel
Emergency button
Split-type room air conditioner / User Manual
front panel