7
Remote controller
Note:
Child-lock: Press and together to active.
C
Display On/Off:
Long press Eco button.
Please remove batteries to avoid leakage damage when not using for a long time.
When you insert the batteries for the first time in the remote controller
or if you change them, you can program the remote controller of only
cooling or cooling and heating.
A
1. Long press Mode button over 5s to get into the change mode within
3 minutes;
2. Press Mode button to change Cool or Heat.
Note:
C
If you adjust the remote controller in cooling mode, it will not be possible to activate
the heating function in units with heating pump. you need to take out the batteries
and repeat the procedure described above.
When you insert the batteries for the first time in the remote controller
or if you change them, you can program the temperature display
switchover function between °C and °F.
A
1. Long press Turbo button over 5s to get into the change mode within
3 minutes;
2. Press Turbo button to change °C and °F.
22 / 58 EN
Signal receptor
Split-type room air conditioner / User Manual