Beko BMVIF 120 User Manual page 31

8 Operating instructions
Option
1. Press at the first time, select the Timer by pressing the button or until symbol Timer is
flashing;
2. Press Option again, the data symbol like
3. To set the timer or change the timer:
(1) Press the button or to set the expected timer (Increase or decrease at half-hour intervals)
the symbols and Timer both are flashing.
(2) Press Option or waiting for 5 seconds without any operation to confirm the timer, the pre-
setting timer like
4. To cancel the timer (if Timer is on)
Repeat step 1, step 2, then press
the timer.
A sample for the Timer-on as Figure 1, Timer-off as Figure 2
C
Note:
All processing should be operated in 5 seconds, otherwise the processing will be cancelled.
Split-type room air conditioner / User Manual
and symbol will be on the display.
Timer
Option
or waiting for 5 seconds without any operation to cancel
Gen
Mode Fan
Heat
Timer
Clean Display
Figure 1,Timer-on
when switch off
and Timer will be flashing;
Option
Turbo
Heat
Sleep Timer I Feel
Display
Figure 2,Timer-off
when switch on
31 / 58 EN