Checking The Residual Battery Capacity; Residual Battery Capacity Indicator Display And Estimate Of Residual Battery Capacity For Display Unit - Yamaha PW SYSTEM Manual

I. Checking the residual battery capacity
You can check the estimate of how much capacity is left in the Battery Pack and to what extent it is
charged. The check can be performed using either the Display Unit's residual battery capacity indi-
cator or the Battery Pack's residual battery capacity indicator lamps.
TIP
• Even if the Battery Pack's capacity reaches 0 (zero), you can still ride the bicycle as a regular
bicycle.
• If you are using an old Battery Pack, the residual battery capacity indicator may suddenly dis-
play very little power when you start moving. This is not a malfunction. Once riding stabilizes
and the load is reduced, the proper value is displayed.
Residual battery capacity indicator display and estimate of residual bat-
tery capacity for Display Unit
The residual battery capacity can be displayed as a numerical value on the Display Unit.
Display of the residual battery
capacity for the Display Unit
(Display A)
(Display B)
Display of the
residual battery
capacity
(Display A, Display B, and Display C)
When you turn on the power of
the Display Unit and ride
continually after the Battery Pack
is fully charged, the segments for
100–11 % the residual battery capacity
indicator go out one by one each
time the residual battery capacity
is reduced by 10 %.
70
Applicable situation