Checking The Residual Battery Capacity - Yamaha PW45 Original Instructions Manual

CHECKING THE RESIDUAL BATTERY CAPACITY

You can check the estimate of how much capacity is left in the battery and to what extent it is
charged. The check can be performed using either the display unit's residual battery capacity indi-
cator or the battery's residual battery capacity indicator lamps.
TIP
• Even if the battery's capacity reaches 0 (zero), you can still ride the bicycle as a regular bicycle.
• If you are using an old battery pack, the residual battery capacity indicator may suddenly display
very little power when you start moving. This is not a malfunction. Once riding stabilizes and the
load is reduced, the proper value is displayed.
Residual battery capacity indicator display and estimate of residual bat-
tery capacity for display unit
The residual battery capacity can be displayed as a numerical value on the LCD display.
Display of the residual battery
capacity for the LCD multi-function
drive controller
Slow flashing
<every 0.5 seconds>
Fast flashing
<every 0.2 seconds>
S-Pede Kit Manual (2016).indd 29
Display of the
residual
Applicable situation
battery
capacity
When you turn on the power of the
LCD multi-function drive controller and
ride continually after the battery is fully
100–11 % charged, the segments for the residual
battery capacity indicator go out one
by one each time the residual battery
capacity is reduced by 10 %.
There is very little residual battery
10–1 % capacity left. Please charge the
battery soon.
There is no more residual battery
capacity. Turn off the power for the
LCD multi-function drive controller and
0 %
charge the battery pack soon.
* Assist is stopped, but you can still
ride the bicycle as a regular bicycle.
29
2015/06/24 9:22:13