Charging The Battery Pack Removed From The Bicycle - Yamaha PW SYSTEM Manual

Charging connector
Charging connector
Charging the Battery Pack removed from
the bicycle
1. Turn the Display Unit off.
2. Insert the key into the battery lock, and turn it to re-
lease the battery lock.
3. Remove the Battery Pack.
WARNING
Use both hands when removing the Battery Pack. Do
not drop the Battery Pack or subject it to impact. Do-
ing so could cause the Battery Pack to become hot or
catch fire, resulting in serious injury or property dam-
age.
TIP
How to remove Multi Location Batteries varies between
bicycles. For more information, see the instruction manual
supplied with the bicycle.
4. Connect the power plug of the Battery Charger to a
household power outlet.
Cap
5. Remove the cap from the charging connector on the
Battery Pack, and connect it to the charging plug on
the Battery Charger.
The Multi Location Battery 400/500 and External
Crossover Battery 400/500 are not equipped with a
cap.
NOTICE
• Do not connect the charging plug of the Battery
Charger with the charging connector of the Battery
Pack in a wet state.
Otherwise, the Battery Charger and Battery Pack
may malfunction.
• Be sure to connect the charging plug only after the
charging connector on the Battery Pack is com-
pletely dry.
Otherwise, the Battery Charger and Battery Pack
may malfunction.
Cap
• Do not apply excessive force to the charging plug
or pull on the cord with the charging plug connect-
ed to the Battery Pack.
Otherwise, the charging plug or connector may be
damaged.
58