Advertisement
1
Polaris Pro Low-Profile Video Camera Dolly
(DL-PLRS-P01)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Low-Profile Knob
2 x End Spacers
Proaim Polaris Pro
Low-Profile Middle Support
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Table of Contents
Related Manuals for PROAIM DL-PLRS-P01
Summary of Contents for PROAIM DL-PLRS-P01
- Page 1 Low-Profile Knob 2 x End Spacers Proaim Polaris Pro Low-Profile Middle Support All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
- Page 2 Assembling of End Spacers Loosen the knob of the end spacers of the Polaris pro camera dolly and mount it on the light stand (Not Included). NOTE: It comes with end-spacers that mount on C-stands & tripods in seconds, allowing you to start filming in a flash.
- Page 3 After loosening the knob of the Low-Profile Middle Support, mount it onto the C-stand (Not Included). Now, after mounting the Low-Profile Middle Support, properly secure it by re-tightening the knob. Then align the center part and attach it to the center support of the track. ...
- Page 4 Camera Mounting Setup Attach plate fluid head (Not Included) to the bottom of the camera (Not Included), and then tighten it using the screw driver. Fluid head (Not Included) plate has now been properly attached camera (Not Included). ...
- Page 5 Loosen and remove the Low-Profile knob of the Polaris Pro dolly. Align and mount the Spinhawk (Not Included) to the center bowl of the Polaris Pro dolly, as shown in the image. Secure and tighten the assembly using the Low-Profile knob at the bottom of the dolly.
- Page 6 YOUR PROAIM POLARIS PRO LOW PROFILE VIDEO CAMERA DOLLY ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.
Need help?
Do you have a question about the DL-PLRS-P01 and is the answer not in the manual?
Questions and answers