Table of Contents
Advertisement
enTransport, storage and disposal
17.1 Emergency release
unlock door
Precondition:The drain pump is
empty. → page 34
1. ATTENTION!Escaping water can
cause damage to property.
Do not open the door if there is
▶
water on the glass.
Pull the emergency release down
with a tool and release.
aThe door lock is unlocked.
Insert the maintenance flap and snap it
2.
into place.
Close the maintenance flap.
3.
18 transport,
storage and disposal
Find out here how to prepare your
device for transport and storage. You
will also learn how to dispose of old
devices.
18.1 Disassemble the device
A notice:Further information can be
found in the digital
instruction manual
Find the QR code in
the directory or on ww
me.com.
48
ch the scan
m content
w.bosch-ho-
Turn off the tap.
1.
Empty the water inlet hose.
2.
Turn off the device.
3.
Unplug the device from the mains.
4.
Drain the suds.
5.
→
"Cleaning the drain pump",
page 34
Disconnect the hoses.
6.
18.2 Insert transport locks
Secure the device for transport with
the transport locks to avoid damage.
Remove the 4 cover caps with a
1.
screwdriver.
Save the top caps.
Install the 4 transport locks. Use the
2.
description as a guide
→ "Remove transport locks",
page 14 and proceed in reverse
order.
18.3 Put the device into
operation again
For more information see
▶
→ "Setting up and connecting",
page 13 and
→ "Before first use", page 20 .
Advertisement
Table of Contents
