Bosch WUU28T67ES User Manual And Installation Instructions
Bosch WUU28T67ES User Manual And Installation Instructions

Bosch WUU28T67ES User Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WUU28T67ES
[en]
User manual and installation
instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WUU28T67ES and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bosch WUU28T67ES

  • Page 1 Washing machine WUU28T67ES [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Further information and explanations are available online: You can find additional information and explanations online. Scan the QR code on the title page. Table of contents 1 Safety ...........  4 6.2 Detergent drawer.....  18 1.1 General information.... 4 6.3 Control panel...... 19 1.2 Intended use......
  • Page 3 13.12 Resuming the programme when the programme status is Rinse Hold ....  30 13.13 Unloading the laundry .. 30 13.14 Switching off the appli- ance........ 30 14 Childproof lock......  31 14.1 Activating the childproof lock ........ 31 14.2 Deactivating the childproof lock ........
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with flammable cleaning agents that contain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. ▶ Never make any technical modifications to the appliance or its features. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶...
  • Page 10: Preventing Material Damage

    en Preventing material damage If the water pressure is too high or Preventing material damage 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least Preventing material damage ATTENTION! 100 kPa (1 bar) and max.
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Reduce the washing temperature for Environmental protection and saving energy 3 Environmental protec- lightly and normally soiled laundry. tion and saving energy a At lower temperatures, the appli- ance consumes less energy. For Environmental protection and saving energy light to normal soiling, lower tem- 3.1 Disposing of packaging peratures than indicated on the...
  • Page 12: Installation And Connection

    en Installation and connection Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 27 Installation and connection Note: The appliance has undergone 4.1 Unpacking the appliance a function test at the factory. This may cause water stains in the appli- ATTENTION! ance, which the first wash cycle re-...
  • Page 13 Installation and connection en If the appliance is tilted at an angle Installation loca- Requirements greater than 40°, residual water may tion leak out of the appliance and cause Against a wall Do not trap the material damage. power cord or Tilt the appliance carefully.
  • Page 14: Connecting The Appliance

    en Installation and connection Unscrew and remove all of Put on the 4 cover caps. the screws for the 4 transit bolts using a WAF 13 wrench. Push the 4 cover caps downwards. Remove the power cable from the holder. Note: To install the transit bolts to transport the appliance, perform these steps again in the reverse or- Remove the 4 sleeves.
  • Page 15 Installation and connection en Connect the water inlet hose to a Plastic pipe with Fix and secure tap (26.4 mm = 3/4"). rubber sleeve or the water outlet gully hose with an el- bow. → "Accessories", Page 27 Connecting the appliance to the electricity supply Note: Your electrical domestic install- ation for this appliance must comply Open the water tap carefully and with the local legal provisions and...
  • Page 16: Aligning The Appliance

    en Before using for the first time Use a WAF 17 wrench to tighten 4.6 Aligning the appliance the lock nuts against the housing In order to reduce noise and vibra- until they are hand-tight. tion and to prevent the appliance from moving, align the appliance cor- rectly.
  • Page 17 Before using for the first time en Pour approx. 1 litre of tap water into compartment II. Add washing powder containing oxygen bleach to compartment II. To prevent foaming, use only half of the amount of detergent recom- mended by the detergent manufac- turer for light soiling.
  • Page 18: Appliance

    en Familiarising yourself with your appliance Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
  • Page 19: Control Panel

    Familiarising yourself with your appliance en Measuring aid for liquid deter- gent → "Inserting the measuring aid", Page 28 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
  • Page 20: Display

    en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. 10h  Program end time → "Buttons", Page 22 Recommendation for the maximum load capacity for the selected program in kg.
  • Page 21 Display en Display Description Programme status: Spinning – –  – – Programme status: Rinse hold Programme status: Programme end ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ance has been operated. → "Deactivating the childproof lock", Page 31 (Prelav.
  • Page 22: Buttons

    en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information Inicio/Pausa + ¡ Start Start, cancel or pause the pro- Carga  gramme. ¡ Cancel ¡ Pause SpeedPerfect  ¡ Activate Activate or deactivate a shorter pro- gramme duration.
  • Page 23: Programmes

    Programmes en Programmes 9 Programmes Programmes Notes ¡ The laundry's care labels provide you with additional information on pro- gramme selection. ¡ For programmes with a temperature setting of 80 °C or 90 °C, the actual temperature may deviate from the specified temperature. The washing effect and hygiene expected at the specified temperatures is nevertheless achieved.
  • Page 24 en Programmes Programme Description Max. load (kg) ¡ Max. 1200 rpm Mix  Wash items made from cotton, linen, or synthetic or blended fabrics. Suitable for lightly soiled laundry. Programme setting: ¡ Max. 60 °C ¡ Max. 1400 rpm Delicado/ Wash delicate, washable items made from silk, vis- Seda ...
  • Page 25 Programmes en Programme Description Max. load (kg) ¡ Max. 1400 rpm Camisas/Blu- Wash non-iron shirts and blouses made from cot- sas  ton, linen, or synthetic or blended fabrics. Note: Use the Delicado/Seda  programme to wash shirts and blouses made from silk or delicate fabrics.
  • Page 26: Laundry

    en Programmes Programme Description Max. load (kg) ¡ If you regularly wash at temperatures of 40 °C or lower ¡ After a prolonged period of non-use Use washing powder containing oxygen bleach. Add the washing powder containing oxygen bleach to compartment II for the main wash. → "Detergent drawer", Page 18 Halve the amount of detergent to avoid foaming.
  • Page 27: Preparing The Laundry

    Accessories en Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 46. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx.
  • Page 28: Detergents And Care

    en Detergents and care products ¡ Load the laundry unfolded into the 13.2 Setting a programme drum ¡ Before loading the drum, any laun- dry that has been pre-treated with Turn the programme selector and chlorine bleach should be rinsed set the required programme. several times → "Programmes", Page 23 If required, adjust the programme...
  • Page 29: Using The Measuring Aid

    Basic operation en Press down on the insert and re- Slide the measuring aid forwards. move the detergent drawer. Fold the measuring aid down and Insert the measuring aid. click it into place. 13.6 Using the measuring aid 13.7 Adding detergent and care product To more easily measure the liquid detergent, you can use a measuring Note: Observe the information about...
  • Page 30: Soaking Laundry

    en Basic operation a The drum rotates and load detec- 13.11 Cancelling the pro- tion takes place. This can take up gramme to 2 minutes, after which water enters the drum. Press Inicio/Pausa + Carga  a The display shows the programme Open the door. duration or the programme end The appliance door remains time.
  • Page 31: Childproof Lock

    Childproof lock en Wipe the rubber gasket dry and re- Basic settings 15 Basic settings move any foreign objects. You can configure the basic settings Basic settings for your appliance to meet your needs. 15.1 Overview of the basic settings Leave the appliance door and de- tergent drawer open so that resid- ual water can evaporate.
  • Page 32: Cleaning And Servicing

    en Cleaning and servicing Press Inicio/Pausa + Carga  16.2 Cleaning the detergent  and, at the same time, turn the drawer programme selector to position 2. Pull out the detergent drawer. a The display shows the current value. Press down on the insert and re- move the detergent drawer.
  • Page 33: Cleaning The Drain Pump

    Cleaning and servicing en Fit the insert and click it into place. Open and remove the mainten- ance flap. Clean the opening for the deter- gent drawer. Slide a sufficiently large container under the opening. Push in the detergent drawer. Take the drain hose out of the holder.
  • Page 34 en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 33 hot. Since water may remain in the Do not touch the hot detergent ▶...
  • Page 35 Cleaning and servicing en Insert the pump cap. Ensure that the parts of the ‒ pump cap are correctly as- sembled. Screw the pump cap as far as it will go. The handle on the pump cap must be in a vertical position. Before the next wash To prevent unused detergent from flowing straight into the outlet in the...
  • Page 36: Troubleshooting

    en Troubleshooting Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶...
  • Page 37 Troubleshooting en Fault Cause and troubleshooting "E:36 / -10" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
  • Page 38 en Troubleshooting Fault Cause and troubleshooting lights up. Voltage under-usage may cause extension of a pro- gramme. No remedial action possible. lights up. The temperature is too high. Wait until the temperature has dropped. ▶ Cancel the programme. ▶ → "Cancelling the programme", Page 30 Water level is too high.
  • Page 39 Troubleshooting en Fault Cause and troubleshooting The appliance is not There has been a power cut. working. Check whether the lighting in your room or other ▶ appliances are working. The programme does has not been pressed. Inicio/Pausa + Carga  not start. Press Inicio/Pausa + Carga ...
  • Page 40 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Continue the programme by selecting or a suit- ▶ ing. able programme for draining and pressing Inicio/ Pausa + Carga  → "Resuming the programme when the programme status is Rinse Hold", Page 30 The water outlet hose is connected too high.
  • Page 41 Troubleshooting en Fault Cause and troubleshooting The spin cycle runs The unbalanced load detection system eliminates an several times. imbalance by repeatedly redistributing the laundry. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
  • Page 42 en Troubleshooting Fault Cause and troubleshooting Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
  • Page 43 Troubleshooting en Fault Cause and troubleshooting Banging noises, rat- Foreign bodies have got into the drain pump. tling in the drain → "Cleaning the drain pump", Page 33. ▶ pump. Slurping, rhythmical The drain pump is active, the detergent solution is suction noise. pumped out.
  • Page 44 en Troubleshooting Fault Cause and troubleshooting The spin result is not Note: Where possible, mix large and small items in satisfactory. The laun- the drum. Different sized items of laundry distribute dry is too wet/too themselves better during the spin cycle. damp. Start the  programme.
  • Page 45: Emergency Release

    Transportation, storage and disposal en 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 33 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
  • Page 46: Disposing Of Old Appliance

    en Customer Service 18.4 Disposing of old appli- Customer Service 19 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health!
  • Page 47: Consumption Values

    Consumption values en Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
  • Page 48: Technical Data

    en Technical data Technical data 21  Technical data Technical data Appliance height 84.5 cm Appliance width 59.8 cm Appliance depth 59.9 cm Appliance depth 63.2 cm with door closed Appliance depth 106.3 cm with door open Weight 72.6 kg Maximum load 9.0 kg Mains voltage 220-240 V, 50 Hz Minimum in- 10 A stallation protec- tion...
  • Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents