Bosch WUU28T41 Instructions For Use And Assembly page 40

enTroubleshooting
Disturbance
"E:35 / -10"
symbol voltage
exceeded (double
Point).
flashes.
shines.
flashes.
All other error codes
of.
"E:30/-20"
40
Cause and troubleshooting
Call customer service.
▶
→
"Customer Service", page 49
Voltage control system detects impermissible
undervoltage.
No fix possible.
▶
A notice:When the power supply has stabilized, the
program continues to run normally.
Undervoltage can cause a program extension.
No fix possible.
Undervoltage can cause a program extension.
No fix possible.
temperature is too high.
Wait for the temperature to drop.
▶
→ "Cancel program", page 32
▶
Water level is too high.
Choose a suitable pumping program.
▶
→ "programs", page 24
door is not closed.
Close the door.
1.
Press to start the program refill .
2.
Laundry is stuck in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
Press to start the program refill .
4.
malfunction
Call customer service.
▶
→
"Customer Service", page 49
Solenoid valve defective.
Call customer service.
▶
→
"Customer Service", page 49
Detergent dosage is too high.
For the next wash cycle with the same load, reduce
▶
the amount of detergent.
Added additional water.
Begin/
Begin/