Table of Contents
Advertisement
encleaning and care
Clean drain pump
Precondition:The drain pump is
empty. → page 34
Since there may still be residual
1.
water in the drain pump, carefully
unscrew the pump cover.
Coarse contamination can cause
‒
the filter insert to get stuck in
the pump housing. Loosen dirt
and remove filter insert.
Clean the interior, the threads of the
2.
pump cover and the pump housing.
The pump cover consists of two
components that can be
disassembled for cleaning.
Making sure
3.
wheel of the lye pump
leaves.
36
the wing
turn mpe
Install the pump cover.
4.
Ensure that the pump cover
‒
components are assembled
correctly.
Screw the pump cover on as far as
5.
it will go.
90°
The handle of the pump cover
must be vertical.
Before the next wash
Run the program to prevent unused
detergent from flowing down the
drain the next time you washpumping
through after you have drained the
drain pump.
Open the faucet.
1.
Plug in the power cord.
2.
Turn on the device.
3.
Fill one liter of water into chamber
4.
II.
Advertisement
Table of Contents
