Info Other Antenna Connections; Other Antenna Connections To The Unit; Other Antenna Connections From The Unit To The Television - Panasonic SC-HT1000 Operating Instructions Manual

Other antenna connections

Other antenna connections to the unit

Use one of the following connections to suit the antenna lead.
≥If your television has both lead and coaxial VHF terminals, use the
lead connection to minimize signal loss.
∫ A single twin lead
from the antenna
(Flat) Twin lead 300 ≠ cable
∫ A twin lead and a coaxial cable
from the antenna
(Flat) Twin lead
300 ≠ cable
(Round)
75 ≠ coaxial cable
∫ Two twin leads
from the antenna
300–75 ≠ transformer
(not included)
(Flat) Twin lead
300 ≠ cable
RQT7061
46
300–75 ≠ transformer
(not included)
To this unit's
RF IN terminal
VHF/UHF band mixer
(not included)
To this unit's
RF IN terminal
VHF/UHF band mixer
(not included)
To this unit's
RF IN terminal
Other antenna connections from the
unit to the television
Use one of the following connections to suit the antenna terminals
on your television. Refer to the television's operating instructions.
≥Connect to one of the terminals, then change the television's
setting as necessary.
∫ A twin lead and coaxial plug terminal
VHF/UHF band separator
(not included)
75 ≠ coaxial cable
∫ A twin lead terminal
75–300 ≠ transformer
(not included)
75 ≠ coaxial cable
∫ Two twin lead terminals
VHF/UHF band separator
(not included)
75 ≠ coaxial cable
∫ Multiple antenna terminals
Split out
ANT 1
75 ≠ coaxial cable
Television
VHF
UHF
Television
VHF or
UHF
Television
VHF
UHF
Television
ANT 2