Technical Data; Booster B-6 - tams elektronik B-6 Manual

tams elektronik

9. Technical data

9.1. Booster B-6

Digital protocols
Data formats
Formats for the automatic
registration of vehicle
decoders
Feedback format
Interfaces
For the connection the digital
central unit or further
boosters
For the connection of of a
BiDiB PC interface
Track output
Electrical properties
Power supply
Maximum output current
Current consumption
(without consumer)
Output voltage
Output signal
Power consumption
Protection
Motorola-I and -II
DCC (according to NMRA and RCN standard)
m3 and mfx (limited to the control of mfx decoders)
DCC-A
This function is not yet available (Status: 04/2023).
RailCom (RailCom cutout can be switched off)
integrated global RailCom detector
BiDiB (RJ45) or
DCC-compliant ("CDE"
BiDiB (RJ45)
Main track
24 volts direct current
Note: Only the power supply unit included in the scope of delivery is permitted
as power supply for the mc² including integrated booster!
2.0 to 6.0 A
adjustable in 1 A steps
max. 100 mA
8 to 22 volts digital voltage (regulated)
adjustable in 1 V steps
symmetrical
max. 132 watts
Booster B-6
Technical data | 39