Display And Rgb-Leds - tams elektronik B-6 Manual

tams elektronik

6.1.2. Display and RGB-LEDs

Display Colour
of the RGB LEDs
0.0 to 6.0
St.
--
--
--
Sh.
Meaning
GO | present current consumption [A]
Booster GO Track voltage at booster output
is switched on.
GO A valid input signal is present at
Central
the booster input.
unit
STOP
STOP
Booster Track voltage at booster output
is switched off.
GO
Central A valid input signal is present at
unit the booster input.
Booster GO
Track voltage at the booster
output is to be switched on.
STOP
There is no valid input signal at
Central
the booster input.
unit
Booster STOP Track voltage at the booster
output is switched off.
STOP
There is no valid input signal at
Central
the booster input.
unit
A valid input signal is present (= control unit is set to
"GO"). However, the autostart function is inactive
(→ section 6.3.2 "Autostart function"), therefore the
track voltage at the booster output cannot be
switched on automatically. Switch on the track
voltage manually with the STOP-GO button.
red-violet flashing: "Short Circuit" / short circuit
during operation
Eliminate the cause of the short circuit. If the short
circuit occurs repeatedly at the same point in the
layout, you may have to make changes to the layout
or increase the short circuit sensitivity (= time until
the short circuit cut-off responds).
Booster B-6
Operation | 31