Operation; Operating And Display Elements; Functions Of The Stop-Go Button - tams elektronik B-6 Manual

Booster B-6

6. Operation

6.1. Operating and display elements

The Booster B-6 has a button with which you can trigger the following functions:

switch the track voltage on and off independently of the control unit

trigger a reset

identify the B-6 via BiDiB with the PC control software (BiDiB-Identify)
The display on the front provides you with essential information during programming and
operation. In addition, the RGB LEDs built into the housing change colour, indicating the
operating status visibly from a distance.

6.1.1. Functions of the STOP-GO button

Function
Switch on track voltage
Switch off track voltage
Send BiDiB-Identify for
the B-6
(→ identification with the
PC control software)
Perform reset
(restart without resetting
all settings to the default
values)
30 | Operation
Duration
press briefly
press briefly
press and hold until the
RGB LEDs flash blue.
To stop sending the signal, press
the button again until the RGB
LEDs light up green or red again.
press and hold until the
blue flashing of the RGB
LEDs changes to a violet
rise and fall.
After the reset, the B-6
automatically switches back to
standard operation.
Display
0.0 | current power
consumption
St.
rE
tams elektronik
Colour of the
RGB LEDs
green
red
blue
flashing
blue
flashing
+ violet
rising and
falling