Advertisement
2.3.11 COLOR CORRECTION SETTING (CAL2)
CAL2
It is possible to correct the RGB balance [of each unit] by changing the maximum values
for each
channel.
To set the color correction setting press MENU until CAL2 is displayed, then press ENTER
button.
Press ENTER button repeatedly to choose the value to modify and UP or DOWN to set it.
2.3.12 KEY PROTECTION SETTING (KEY)
KEY
The menu panel can be password protected to prevent any unauthorized operations
changes (the lock will be set immediately after that the display turns off when passing 30
seconds without any key being pressed).
Lock the keypad to prevent unwanted changes by pressing MENU until KEY is displayed,
then press ENTER and UP or DOWN to select "ON" or "OFF".
The display will automatically turn off after 30 seconds if no key is pressed. The default
password sequence to unlock keys is: UP-DOWN-UP-DOWN. To unlock, press any key to
activate again the display press and release the UP button, followed by DOWN, press the
UP button again, press DOWN again and release it, finally press ENTER to confirm.
RGbW.
OFF.
ON.
20
(25-255)
R.000
(25-255)
G.000
(25-255)
b.000
Advertisement
