Advertisement
2.3.4 DMX ADDRESS (AddR)
AddR
To set the DMX starting address for the current unit press MENU until "AddR" appears;
then press ENTER to set the desired address choosing the value by pressing UP or
DOWN button.
While receiving a standard DMX512 signal the point on the right after the fourth digit will
flash on the lower corner of the display.
If it does not flash, please check if the console (or any other DMX512 compliant signal
source) is properly connected and
Press MENU button to return to the main menu.
2.3.5 DMX512 CHANNEL MODE (PERS)
PERS
d.001
transmitting.
STAG.
AR2.S
AR2.d
ARC.2
AR1.S
AR1.d
ARC.1
COM2.
COMP.
HSV.
15
(001-512)
Advertisement
