Advertisement
2.3.3 DMX AND SLAVE (RUN)
RUN
The "RUN" menu allows the user to choose if the light source is going to listen to
incoming DMX signal or
Press ENTER button and choose the desired mode by pressing UP or DOWN button:
• "dMX" represents standard DMX512 mode. The light source receives a standard
DMX512 signal from a DMX source
"STAT" modes, eventually sending the same color values to all the connected slave
units as Master);
• "SLAV" represents the Slave mode: the unit will recognise only the signal received from
the Master unit (any standard DMX signal will be passed over).
To select your desired operating mode, press the MENU button and return to the main
menu. The main menu item "RUN" will be displayed again, and you can scroll through the
other operating modes and functions.
When using different models of ArchiLED simultaneously, with varying LED configurations
(such as RGB, RGBW, RGBAL) in the same chain, the Master unit must have the most
channels. Additionally, the Master unit must be programmed correctly in one of the
"STAT" or "AUTO" modes by editing one of the PR.01-PR.10 programs to use only the
common channels available on all the different models (usually RGB only).
In this way the signal will correctly be recognised by all the units and they will work
seamlessly together despite the differences between them.
By doing so, the signal will be correctly recognised by all units, and they will work
seamlessly synchronised together despite the differences between
dMX.
SLAV.
a slave unit when in external control mode.
operate as
(
or run as standalone when selecting "AUTO" or
14
them.
Advertisement
