Advertisement
2.3.2 AUTO MODE (AUTO)
AUTO
To run standard and custom programs press MENU until "AUTO" appears on the display.
Press ENTER button to enter the sub-menu and choose the desired program by pressing
UP or DOWN button.
Once you have set the desired program you don't have to exit the submenu. In this way
the fixture will keep this program as its new default "AUTO" mode and continue displaying
the name of the selected program). Even if the fixture is turned off, it will start the same
program as soon as powered on again.
To exit the automatic program standalone mode, simply press the MENU button to return
to the main menu. You will see the main menu item "AUTO" displayed again, and you can
scroll through the other operating modes and functions.
To ensure that many units run the same program smoothly is preferable to set one unit as
a master to run the automatic program in "AUTO" mode and connect other units as
slaves (as explained on page 14). Otherwise, delays may occur between the units after
running the same program for an extended period since each fixture does not have the
same crystal oscillator clock frequency.
Please note: when DMX channel mode is set on "STAG", channel 8 can be used to select
one of these programs (AT.01-AT.10 and PR.01-PR.10).
AT.01
AT.10
PR.01
PR.10
13
Advertisement
