Advertisement
2.3.8 SCENE EDITING (EDIT)
EdIT
To edit the scene values of a custom program enter the scene editing mode by pressing
MENU until "EdIT" appears and then press ENTER to access the sub-menu.
Choose the program (PR.01-PR.10) to edit by pressing UP or DOWN button, select it by
pressing ENTER. Select the scene (SC.01-SC.30) of the currently selected program you
want to edit by using UP or DOWN buttons and then press ENTER to scroll through the
scene parameters and change them with UP or DOWN buttons.
The color component parameters and strobe effect setting is the same of static color
mode (menu "STAT", see pag. 12).
"T.000" value represents the overall scene duration, while the "F.000" value is the fade
time between consecutive scenes.
You can transfer program data between various units by sending the data from a master
unit, which programs are copied to one or more other units that are connected as slave.
The copied values are all the scenes of the custom programs PR.01-PR.10 which will be
overwritten on all the slave units.
PR.01
PR.10
SC.01
SC.30
17
(0-255)
R.000
(0-255)
G.000
(0-255)
b.000
(0-255)
W.000
(0-20)
ST.00
(0-255)
T.000
(0-255)
F.000
Advertisement
