Advertisement
To set the DMX channel mode press MENU until "PERS" appears.
Press ENTER button and choose the desired mode by pressing UP or DOWN button.
For specific channel modes description please refer to "Channel Table" (see pages
21-26).
Press MENU button to return to the main menu.
2.3.6 ID ADDRESS CODE (ID)
(01-66)
Id
Id.01
In "STAG" DMX channel mode, series of fixtures with the same DMX address (up to 66
units) can be indexed with a different ID and independently controlled to achieve various
brushing effects, despite having the same channel assignment and starting DMX address.
To accomplish this utilise the 11th DMX channel to selectively send the other DMX
channel values only to fixtures that share the same selected ID.
To set a different ID for each fixture press MENU until "Id" appears.
Press ENTER button and choose the desired ID by pressing UP or DOWN button.
Press MENU button to return to the main menu.
Please note: the ID function must be enabled in native setting menu ("SET") to work as
described (see page 18).
2.3.7 WORKING TEMPERATURE (TEMP)
TEMP
CURR.
0
To see the current Celsius temperature press MENU until "TEMP" appears; then press
ENTER to access "CURR" menu item. The current working temperature detected inside
the light source will be displayed.
Please note: the showed temperature may not be so much accurate due to the hardware
material inconsistencies and the mounting position of the thermistor (values between
different units may be different).
16
Advertisement
